create_object
Create a new object in FreeCAD.
Object type is starts with "Part::" or "Draft::" or "PartDesign::" or "Fem::".
Args:
doc_name: The name of the document to create the object in.
obj_type: The type of the object to create (e.g. 'Part::Box', 'Part::Cylinder', 'Draft::Circle', 'PartDesign::Body', etc.).
obj_name: The name of the object to create.
obj_properties: The properties of the object to create.
Returns:
A message indicating the success or failure of the object creation and a screenshot of the object.
Examples:
If you want to create a cylinder with a height of 30 and a radius of 10, you can use the following data.
```json
{
"doc_name": "MyCylinder",
"obj_name": "Cylinder",
"obj_type": "Part::Cylinder",
"obj_properties": {
"Height": 30,
"Radius": 10,
"Placement": {
"Base": {
"x": 10,
"y": 10,
"z": 0
},
"Rotation": {
"Axis": {
"x": 0,
"y": 0,
"z": 1
},
"Angle": 45
}
},
"ViewObject": {
"ShapeColor": [0.5, 0.5, 0.5, 1.0]
}
}
}
```
If you want to create a circle with a radius of 10, you can use the following data.
```json
{
"doc_name": "MyCircle",
"obj_name": "Circle",
"obj_type": "Draft::Circle",
}
```
If you want to create a FEM analysis, you can use the following data.
```json
{
"doc_name": "MyFEMAnalysis",
"obj_name": "FemAnalysis",
"obj_type": "Fem::AnalysisPython",
}
```
If you want to create a FEM constraint, you can use the following data.
```json
{
"doc_name": "MyFEMConstraint",
"obj_name": "FemConstraint",
"obj_type": "Fem::ConstraintFixed",
"analysis_name": "MyFEMAnalysis",
"obj_properties": {
"References": [
{
"object_name": "MyObject",
"face": "Face1"
}
]
}
}
```
If you want to create a FEM mechanical material, you can use the following data.
```json
{
"doc_name": "MyFEMAnalysis",
"obj_name": "FemMechanicalMaterial",
"obj_type": "Fem::MaterialCommon",
"analysis_name": "MyFEMAnalysis",
"obj_properties": {
"Material": {
"Name": "MyMaterial",
"Density": "7900 kg/m^3",
"YoungModulus": "210 GPa",
"PoissonRatio": 0.3
}
}
}
```
If you want to create a FEM mesh, you can use the following data.
The `Part` property is required.
```json
{
"doc_name": "MyFEMMesh",
"obj_name": "FemMesh",
"obj_type": "Fem::FemMeshGmsh",
"analysis_name": "MyFEMAnalysis",
"obj_properties": {
"Part": "MyObject",
"ElementSizeMax": 10,
"ElementSizeMin": 0.1,
"MeshAlgorithm": 2
}
}
```